GREETINGS FROM...

A few months back I signed on for a co-op project through the Ladies of Letterpress. The task: to make 125 letterpressed copies of a "Greetings From..." 4x6 postcard representing your state or city/town.
In the tradition of postcards like this:

Here are the two versions I designed (Nate preferred the one with the full cow showing, so that's the one I'll print and turn in):

PRACTICE MAKES PERFECT

I gave the card design from my post last week another go at printing, since I was having some issues. I'm a lot happier with how they turned out this time. I still was not able to get much of an impression in the paper, but I'm starting to realize that might just be a limitation of my little tabletop press, and not my junior printing knowledge. At least I got a good solid ink hit on both the wood grain background and the main content on the design.
Take a look:

BUSINESS CARDS: FLOYD LUKE, CARPENTER

This is the first project with my photopolymer plates, so it's a real work-in-progress. I'm 80% happy with where I'm at now, but I hope one more attempt will get me to 100%... My original thought on this project was to make a deep impression of wood grain texture on the paper (with no ink, similar to an emboss, but without as much show-through on the other side). But I was having a real problem with getting the amount of pressure that I wanted and was not getting much of an impression in the paper, at all. I knew my paper wasn't the issue (Crane Lettra 110lb), because I've seen plenty of projects done using this paper and showing an impression. I thought it might be the amount of paper I had backed behind my print paper, but I added more, and still nothing. I gave up on this idea, to avoid getting frustrated with my new hobby... Improvising, I printed the wood texture with a really light tint of ink and moved on to the printing of the content. I ran into a similar problem here, where I wasn't getting a full and rich hit of ink on each print... Close, but not quite there. So I added more ink, but this was not the problem.
With a clear head this morning, I am now guessing that my eyes were larger than my Boxcar base (if that makes any sense). I was trying to print the cards 3-up per print, to save myself some time, but I think that was what was causing all the time I spent trouble-shooting. There was too much surface area on the plate that I wanted to print, and it was extending all the way out to the edge of the chase. I think I will try again tonight by just printing one card at a time and see if I get better results. Stay posted on if I get any better results...

Here's what the photopolymer looked like while stuck on the base in the chase, ready to get inked up. I'm thinking it's definitely too much surface area I'm wanting to print on too small of a base, so I will cut up the plate and see how that goes.

Close-up, so you can see the height of the plate and how detailed it can get with that small type!

Here's the final card, where it is at now. The wood-grain pattern is a little TOO subtle in the background and the black content is not as solid as I would like. So I will keep trying...

Here's an idea my client, aka "Dad," came up with... I bought a few sheets of balsa wood in different weights at the craft store and printed directly on that. These turned out the best of anything I did in that printing session. The black printing came out very rich, and they were easy to cut with an exact-o knife. I also decided to round the corners on these ones for a more polished look.

SPRING CARD

I set up and printed my first big project today, after the warm-up of the Thank You card. It's a spring card I designed in Illustrator. To make it a two color print, I had two magnesium print plates created. Here's a step-by-step in pictures:

Locking up the first magnesium plate into the chase. It's a 8x5" chase, and my card design was 6x4", so I only needed a little bit of furniture and the metal lock-up bars, which I could screw into.

Mixing up the inks was more challenging than I anticipated. Such a small amount of color goes a very long way. Something I need to keep mindful of in the future.

Applying the ink to the plate.

All inked up after many many cranks on the lever... I'm going to get a very strong left arm!

Chase in place, getting inked up by the rollers. Paper laying in gauge pins ready to get printed.

Second plate/color all ready to go.

I even printed my return address on the flap of all the envelopes. :)

Finished cards all ready to mail!

THANK YOU CARD PROJECT

After finally receiving all of my supplies, I set out to print my very first project! It was very simple, but I'm happy with the way it turned out.

FIRST PEEK

I've been busy collecting ink/paper/envelopes/etc and making designs, so I haven't really ramped up my blogging yet. I have two projects that I want to print in the next week: one very simple to get the press and myself warmed up, and the other more of a challenge.
Here's a peek at the first project. A simple "thank you" card. I hand-carved the design into a 3x2" linoleum block (hopefully for a rustic, and not just messy feel)...

And the other is the spring-inspired card I'll be sending out to many of you. I made the design in Illustrator, asked Nate to write a poem for me to center it around, and sent off my digital files to Owosso Graphics who made me a magnesium die mounted on a wood block. It's going to be two colors, so I had two different 6x4" dies cast. This one should be very crisp and detailed when printed, if I do everything right!